Activate the “DEV_MODE”

⚠️ Important
Only follow these steps if you have been instructed to do so by our support team.



Temporary Diagnostic Steps


  1. Activate Expert Mode

👉 Guide: https://doc.common-services.com/en/article/activate-expert-mode-1wa1807


  1. Enable DEV_MODE

Go to the module configuration and activate the option as shown below:


Activate DEV_MODE Amazon module



✅ Once done, make sure to disable both DEV_MODE and Expert Mode.

Updated on: 11/07/2025

Was this article helpful?

Share your feedback

Cancel

Thank you!